2011 ERYD 30 daysailer9m

ERYD 30 Classic (2011) Daycruiser/Daysailer  

Design: Emanuele Rossi

Hull, Deck & Superstructure Construction:
New hull paint, antifouling and cleaning of teak deck (2020). Cockpit and deck in teak.

Keel & Rudder:
Carbon construction, fixed keel giving plenty of space below.

Machinery, Engine & Gearboxes:
1 x 9 CV / 6.6kW Lombardini diesel engine with saildrive. Engine cut (2020).
Engine Hours: Approx. 60

Propulsion & Steering: Control with tiller.
Ideally piloted by single person  

Fuel: Total capacity of 40 liters

Fresh water:
Total capacity of 80 liters

Galley:
Gas burner (original has been demounted, so there is a separate burner). Possibility to add a stand-alone 220V induction cooktop

Heads/Showers:
1 x WC. Deck shower

Entertainment:
iPod interface.
Speakers x2 (interior)

Rig:
Carbon maxspar

Sails:
MAINSAIL - 58 m2 BOW - 18 m2.

Fire-fighting equipment:
Fire extinguisher

Beds: Single beds:: 2 Double bed (forepeak): 1  

NEW:
Batteries (2x100 Ah)
Battery Charger (fixed installation)
Battery Monitor (analogue)
Prepared for shore power (installation almost finished), including a 220V interior outlet
Double Raymarine chart plotters (Axiom 9”), wireless connection through Raymarine MicroTalk to TackTick depth and speed instrumentation (wind and water sensors) TackTick wireless instruments MN 100-2
Autopilot, Raymarine ST1000/2000

Info from the ERYD official builder website:

BUILDING
the hull is vacuum bag built, using the sandwich technology mode, a mix of resin, vinyl for the outer surface and quadriaxial (random) but unidirectional glass fibers
the keel and rudder are built using a carbon/epoxy resin mix
a lead/antimony alloy was used for the bulb

RIG
the mast and boom were built by Maxspar using prepreg carbon fabrics
the spreader is in aluminum inclined at 30 degrees
it also sports rod rigging, Ronstan turnbuckles, carbon bowsprit

MOTORIZATION
Lombardini LDW 502 with sail drive and Radice folding blade propeller

SAIL PLAN
two options are offered: a square rig, and a standard reach with 5 full battens
103% jib and asymmetric spinnaker up to or at 7/8 of the masthead

DIMENSIONS
length: 9.00m
width: 2.35m
draft: 2.20m
displacement: 2 tons 15
upwind sailing surface: 54m²
asymmetrical spi masthead: 88m²
asymmetrical spi 7/8: 78m²

La Società pubblica i dettagli di questa imbarcazione in buona fede e non può pertanto avvallare o garantire l'esattezza di tale informazione.