2020 Hunt Yachts Surfhunter

Zusatzinformationen, Zubehör und Ausstattung:

Closed cell foam-cored bottom, and topside laminate

Foam-cored E-glass stringers & bulkheads

Painted bilge

Extruded vinyl sheer guard, with stainless steel rub rail

Flag Blue Awlgrip hull

Single white boot stripe

Deck - Teak deck with varnished teak toe rail

Swim platform - Armstrong outboard bracket with telescoping swim ladder

Anchor locker - Interior locker

Handrails - (2)Teak foredeck handrails (1) on each side of original foredeck hatch

Chocks - (2)S.S. bow chocks, where applicable original hardware will be chromed and reinstalled

Cleats - (4)pull-up S.S. 8” cleats & (2) bow cleat 

Ensign - Custom teak staff (varnished) with US flag & S.S. socket

Burgee - Custom Teak burgee staff (varnished) on bow

Windshield - Teak windshield with two vents

Wipers - Pantograph port & starboard with windshield washers

Lights - LED USCG-approved running lights

Hatch - Original stainless steel hatch

Fender pad eyes - (4)Wichard pad eyes (2) port & (2) starboard

Fills - S.S water, fuel & waste

Drink holders - To be determined

Foam - High density foam core in way of high load hardware

Access - Varnished teak companionway doors and sliding hatch (with covers)

Berths - V-berth with integrated storage, clients choice of Sunbrella fabric

Head - Electric saltwater head with diverter Y-valve & holding tank

Lighting - S.S. dome light

Storage - Lockers to port and starboard

Cabin sole - Teak & holly sole

Interior - Painted overhead with varnished teak battens, teak slat hullsides

Bimini top - To be determined

Covers - Sunbrella covers for teak companion way, helm console, electrical panel, p/s glove box, helm / mate seat, table & aft bench

Helm - Teak console, built in chartplotter, controls

Compass - Ritchie (calibration included)

Seating - (2)Release marine (or similar) helm seats, teak with cushion, stainless steel pedestal, aftbench seating includes (1) varnished table with stainless steel pedestal and (2) hassocks

Cushions - To be determined

Drainage - Self-bailing cockpit with guttered hatches

Lighting - LED strip lighting under coaming in cockpit and lighting in forward sole compartment

Interior - Interior cockpit to be gloss varnished teak

Engine - Single Evinrude G2 300, balance of a 10 year Evinrude warranty. Engine data to interface with chartplotter

Propeller - S.S. 4-bladed prop

Steering - Intergral of outboard

Fuel - (1) 110-gallon tank

Water - (1) 15-gallon tank

Oil - 10 gallons

Bilge pumps - (1) 1,100 GPH aft (automatic), (1) 2000 GPH midships (automatic), high-water bilge alarm

Batteries - (2)12-volt marine-grade AGM, 10-amp battery charger, transom-mounted rotary switch

VHF radio - Simrad VHF

Electrical outlet - (1)12-volt outlet at helm

Thruster - Side power bow thruster

Electronics - Simrad multifunction display

Bottom paint - (2) coats ablative paint

Name &  hailport - Vinyl letters in any color & style

Anchor - 14 lb. Delta with 20’ x ¼” chain, 200’ x ½” rode

Boat gear - (4)25’ x ½” braided docklines; (3) fenders 6” x 15”, Maine Point covers & 3/8” braided

Safety gear - (4)Type II PFD lifejackets in bag; (1) fire extinguisher; (1) hand-held canister airhorn; (1)throwable floating device (square cushion); (2) plastic whistles; (4) hand-held flares;flashlight with batteries; basic first-aid kit; spare fuse kit.

Burgee - Custom Varnished teak burgee staff on bowYachting Solutions supplied cleaning kit

Documentation - U.S. Coast Guard documented

WARRANTY COVERAGE:
Yachting Solutions, LLC hereby warrants to the original Buyer of the Boat, subject to the exclusions, limitations and conditions set forth below, that each of the (a) hull and deck structure (b) components and parts which are not covered by a third party manufacturer’s warranty and (c) components and parts manufactured by Yachting Solutions, LLC, will be free from defects due to substantial material or workmanship under conditions of normal recreational consumer use.

DURATION OF THE WARRANTY:
The warranty on the hull and deck structure shall be in force and effect for a period of 5 years commencing on the date of title to the boat transfers to the Original Purchaser from Yachting Solutions, LLC (the “Warranty Commencement Date”). The warranty on (i) components and parts which are not covered by a third party manufacturer’s warranty and (ii) components and parts manufactured by Yachting Solutions shall commence on the Warranty Commencement Date and expire on the first anniversary thereof. Yachting Solutions, LLC also warrants to the Original Purchaser of the Boat that the portion of the hull below the waterline is free from cosmetic blistering for a period of 5 years from the Warranty Commencement Date.

WARRANTY CONDITIONS, EXCLUSIONS AND LIMITATIONS:
The following exclusions, limitations and conditions hereby apply to this warranty and qualify this warranty in its entirety:
(A) In order to maintain coverage under this warranty, the Boat must be properly maintained and repaired in accordance with Yachting Solutions, LLC recommended maintenance program, on an annual basis, and prescribed by Yachting Solutions, LLC. Yachting Solutions, LLC strongly advises that all recommended repair and maintenance be performed by Yachting Solutions, LLC.
(B) This warranty specifically excludes, and Yachting Solutions, LLC hereby does not warrant, any item incorporated into the Boat which was manufactured by a third party and covered by a manufacturer’s warranty (such as engine(s), generators(s), batteries, electronic equipment, navigational equipment, toilet(s), pumps and accessories). Yachting Solutions, LLC will use reasonable efforts to provide to the original Buyer
the benefit of any applicable third party warranty in order to facilitate any claim by the original Buyer under such warranty.
(C) Expenses for hauling out, launching, and transportation of the Boat to and from Yachting Solutions, LLC Boat Yard are the sole responsibility of the boat owner. Expenses for the owner’s transportation to and from the Boat or to and from Yachting Solutions, LLC Boat Yard are the sole responsibility of the boat owner.
(D) This warranty specifically excludes damages from normal wear and tear, casualty, accident, abuse, misuse, improper storage, improper maintenance, neglect, modifications or alterations of the hull or deck and unauthorized repairs.
(E) This warranty specifically excludes cosmetic items and finishes including, paint, varnish, gel coat; chromium plated finishes, discoloration, chalking, cracking and fading or stress lines.
(F) This warranty specifically excludes windshield breakage and any other glass damage.
(G) This warranty does not apply to the hull and deck structure (floors, stringers, motor mounts, transom, all deck and hull joints) or accessories which have been subject to alteration, unreasonable use, improper storage or maintenance, neglect or accident.
(H) This warranty does not apply and shall immediately become null and void in the event the Boat is used for commercial or racing purposes.
(I) OTHER THAN AS SPECIFICALLY SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES. YACHTING SOLUTIONS, LLC SHALL NOT HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF THE BOAT, LOSS OF TIME, INCONVENIENCE, TRAVEL EXPENSES, HAUL OUT EXPENSES, BOAT PAYMENTS, STORAGE CHARGES, LOSS OF OR DAMAGE TO PERSONAL PROPERTY, COMMERCIAL LOSS OF CONSEQUENTIAL DAMAGES.
Some jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the limitation set forth in this clause (I) may not apply.
(J) The benefits afforded under this warranty will not be honored by Yachting Solutions, LLC at any time when there are outstanding balances due to Yachting Solutions, LLC for storage fees or any work related to the Boat.

WARRANTY REMEDY:
Yachting Solution, LLC’s sole obligation under this warranty is hereby limited to the repair or replacement, at Yachting Solutions, LLC’s sole election, of the defective materials or workmanship. Yachting Solutions, LLC may perform this work itself or cause the work to be performed at Yachting Solutions, LLC’s expense by a third party. Any claims made under this warranty must be made in writing to Yachting Solutions, LLC immediately after discovery of the defect, giving the details as to the nature of the problem, the hull number and the date of purchase. The right to repair or replacement
is the boat owner’s sole remedy under this warranty. Yachting Solutions, LLC disclaims and the boat owner expressly waives, all other remedies including any right to consequential, incidental or exemplary damages whether or not based on Yachting Solutions, LLC’s negligence, defects in product or workmanship, breach of warranty, strict liability or otherwise.

WARRANTY DISPUTE RESOLUTION:
If a warranty claim is alleged by the Boat Owner and is disputed by Yachting Solutions, LLC, the Boat shall be surveyed and the surveyor shall determine whether the claim is covered by the warranty. The survey shall be performed by an independent, registered marine surveyor, mutually agreed to by the Boat Owner and Yachting Solutions, LLC. If the Boat Owner and Yachting Solutions, LLC, cannot agree upon a surveyor, then the surveyor will be appointed by the Yacht Brokers Association of America. The cost of such a survey, shall be borne as follows: by the Boat Owner in the event the surveyor concludes that the defect, flaw, or repair is not covered by the terms of the limited warranty as described herein, or by Yachting Solutions, LLC in the event the surveyor concludes that the defect, flaw or repair is covered by the terms of the limited warranty as described herein.

RESERVATION OF RIGHTS:
Yachting Solutions, LLC reserves the right to improve its products through ongoing changes in design or material without obligation to incorporate such changes on boats of prior manufacture.

WARRANTY ASSIGNMENT:
This warranty is not assignable unless Yachting Solutions, LLC has specifically agreed to such assignments, in its sole discretion. Assignment of this Warranty without consent shall automatically discharge Yachting Solutions, LLC of any of its obligations hereunder.