Close
Close

I'm a boater! Email me yachts and information.


I accept YachtWorld's Terms of Use

2011 Sly 48 C

EUR  250,000*
Preissenkung EUR  40,000 (Okt 22)
Sicily, Italien
An diesem Boot interessiert? Telefon: +44(0)1590 673715
  • Beschreibung
  • vollständige Spezifikationen ansehen
 

E-Glass performance cruiser

Jahr:
2011
Länge:
15m
Motor-/Treibstoffart:
einmotorig / diesel
Liegeplatz:
Sicily, Italien
Rumpfmaterial:
GFK (Fiberglas)
YW#:
80212-3600848
aktueller Preis:
EUR  250,000 

Great specification, smartly presented example of the Marco Lostuzzi designed performance cruising SLY 47 C. Italian production yacht building at its very best.

 

FURTHER BROKER’S COMMENTS:

 

The Sly 48 C was of the first designs to be built under Sly Yachts new ownership. The Maroc Lostuzzi design, developed from the well-proven Sly 47, was conceived as a fast performance yacht with interiors and cockpit layout focussed towards cruising, rather than racing.

 

NEMORAN is quite unique amongst her peers and boasts many significant upgrades including:-

  • Teak deck
  • Foldable rigid bimini on the coachroof
  • Standard 2.50 m keel
  • Self-tacking jib
  • Harken electric winches
  • Larger Volvo Penta 75hp
  • Three folding blades propeller
  • Heater
  • Raymarine chartplotter
  • Retractable Bowthruster.

 

MANUFACTURER’S COMMENTS:

 

The SLY 48 C has all top-of-the-range comforts, for fun and easy long-range cruises, even with small crew. The new deck layout is the main novelty compared to the previous models. The shape has a distinctive, elegant, semi-raised saloon, attractively highlighted by the addition of a large window in the roof.

 

The standard self-tacking jib; the carefully designed distribution of the winches in the cockpit as well as the ropes returning below the deck; mainsail tack point which frees up the cockpit; highly accessible instruments on the columns or repeated views on the mast, bowsprit, wide sideways together with generously sized cockpit all these make SLY 48 C ideal for fun and easy cruising, which is what it was designed for, even with minimal crew.

 

The use of glass and carbon fibres sandwiched with epoxy-vinylester resins, together with the innovative Sly i2 - Integral Infusion- ensure light displacement, more rigidity, less torsion and greater reliability and durability in the long term. This kind of construction, together with excellent weight distribution, facilitates glide and maneuvers both by engine and by sailing, it improves wave cutting and lessens the load on both rigging and structure.

 

Careful structural planning and painstaking work in the testing tank define innovative and effective water lines in terms of performance and guarantee simple handling and stable steering.

 

Sly i2 – Integral Infusion

 

The exclusive “Sly i2” infusion technology was developed by Sly Marine to guarantee quality and safety on board its crafts. It allows perfect integration between the laminate base of the hull bottom and the structures lengthways and widthways, avoiding differences in the laminates and inaccuracies in the boat’s structure that would be the case with sequential processes. The hull and structure become a single unit, which guarantees solidity and reliability.

 

CONSTRUCTION

 

RCD Status:

  • Under understanding is that the vessel complies with the European Union Recreational Craft Directive and is categorised A – Offshore.

 

Hull Construction:

  • Infusion moulded E-glass / epoxy laminate with carbon reinforcements in selected areas
  • Sandwich with closed cell foam cored hull, with higher density foam in bottom and slamming areas
  • Fibre reinforcements are multiaxial and unidirectional.

  • Structural bulkheads are of veneered sandwich construction or marine grade waterproof plywood.
  • Bottom stiffeners reinforced with unidirectional carbon and multiaxial glass fibre in selected areas
  • GRP engine beds
  • Carbon fibre chainplate deck fittings
  • Epoxy coated underwater sections

 

Deck & Superstructure Construction:

  • Infusion moulded E-glass epoxy laminate sandwich deck with glass skins and closed cell foam core.
  • High density core or compact laminate under winches and deck hardware as appropriate.
  • Single colour white gelcoat with moulded in non-skid on the cockpit
  • Teak deck

 

Keel & Rudder:

  • T-keel, steel fin boxed in steel and a lead bulb
  • The fin is bolted to hull with high tensile steel bolts
  • Fin epoxy coated and faired to class tolerances
  • The rudder stainless steel shaft rotating on two self-aligning bearings
  • The he blade is made from numerically controlled recess-moulded composite material (unidirectional and biaxial E-glass fibre laminated with epoxy-vinyl ester resins).

 

MACHINERY

 

Engine & gearbox:

  • Volvo Penta D2-75HP 4-cylinder naturally aspirated 55hp diesel engine
  • Volvo Sail drive gearbox
  • Fresh water engine cooling via raw water intake and heat exchanger
  • Morse single lever throttle/gear lever

 

Service & Maintenance:

  • Engine hours – approx. 1,500 as of October 2019
  • Date of last engine service – 2019

 

Propulsion & Steering:

  • 2-blade 19’’ Volvo folding propeller
  • An aluminium quadrant, wire steering with chain and sprocket.
  • The rudder bearings are self-aligning.
  • Roller bearing sheaves.
  • Twin composite pedestal integrated with cockpit sole
  • Twin lightweight aluminium steering wheels
  • Lightweight aluminium emergency tiller
  • Retractable Bowthruster

 

ELECTRIAL SYSTEMS

 

Voltage systems:

  • 12vDC primary domestic system with 12vDC starting circuit and AC via 220vAC shorepower.

 

Battery Banks:

  • 12Vdc services battery pack providing 360 Ah
  • 12vdc Starting battery

 

Charging / Inverter:

  • Mastervolt combi 12/2000-100 charger 100Amp 3-step battery charger.

 

Alternator:

  • 12v 115A engine mounted alternator

 

Shorepower:

  • Marinco 30Amp 220vAC 50Hz shore power socket in cockpit

 

Entertainment :

  • Samsung LCD TV in the saloon

 

PLUMBING & GAS SYSTEMS

 

Fresh Water:

  • Pressurised fresh water supply via 12vDC pressure pump
  • Hot water produced by engine-driven calorifier or via immersion heater element in 25 litre well-insulated hot water tank.
  • Back-up foot pump for fresh water

 

Black & Grey Water:

  • Y-valve in heads, overboard discharge or holding tank.
  • Grey water discharges overboard

 

Bilge Pumps:

  • 3x 12vDC electric bilge pump
  • 1x manual bilge pumps
  • Each head has a special flexible suction pipe for collecting water in areas that cannot be reached by the fixed bilge drainage system

 

TANKAGE

 

Fuel:

  • 215 litres fuel capacity
  • Analogue fuel tank gauge at DC panel

 

Fresh Water:

  • 530 litres in polyethylene tanks
  • Analogue water tank level gauge at DC panel.

 

Holding Tanks:

  • flexible blackwater holding tank.
  • Tank emptied by hand pump or deck suction

 

NAVIGATION & COMMUNICATION EQUIPMENT

 

In Cockpit:

  • 1x multi-display Raymarine can be moved inside
  • 2x Danforth Compass

 

At Chart Table:

  • 1x multi-display Raymarine can be moved outside
  • 12 vDC socket

 

Communications Equipment:

  • Raymarine VHF

 

DOMESTIC EQUIPMENT

 

Galley:

  • Two-burner Tecnoimpex alcohol stove with oven, protected by stainless steel guard
  • Stainless steel double sinks with hot & cold pressurised fresh water tap
  • Counter tops
  • Drawer and lockers
  • 12vDC 105 litre capacity top loading refrigerator with drain valve.
  • Garbage bin

 

Heads:

  • Jabsco manual electric marine heads
  • Hot & cold pressurised shower
  • Teak floorboards new

 

ACCOMMODATION

Summary of Accommodation:

  • Up to 8 berths in 3-cabins plus two heads.
  • The interior is finished in teak with satin white painted bulkheads
  • Plywood floorboards covered with teak veneer

 

Accommodation layout from Forward:

 

Forward Cabin:

  • Forward owner’s cabin with double berth with storage under.
  • Reading lights above the berth
  • Locker with shelves and doors
  • Shelves on hull side

 

Forward Heads:

  • Stainless steel sink and hot & cold pressurised shower fitting
  • Mirrored lockers
  • Electric marine heads
  • Teak floor grating with 12vDC pump-out for shower

 

Saloon:

  • The saloon has a folding leaf table.

 

Galley

  • L-shaped galley with stowage in cupboards and lockers
  • Gimballed stove
  • Twin sinks
  • Top-opening fridge

 

Chart Table:

  • Chart table with upholstered seat
  • Panel for navigation and communications equipment
  • AC & DC panel

 

Aft cabins:

  • Double berth
  • Stowage under berth
  • Shelf on hull side
  • Hanging locker in starboard side cabin
  • Locker with shelves in port side cabin

 

DECK EQUIPMENT

Rig:

  • 19/20 aluminium mast is with double swept spreader
  • Deck stepped mast
  • Recessed genoa furler
  • Bowsprit system with anchor.
  • Holmantro hydraulic backstay
  • Rod vang
  • Self-tacking jib
  • German mainsheet system
  • Twin spinnaker halyards
  • Upwind sail area: 115mq
  • I = 20100 mm
  • I top = 20900 mm
  • E (boom) = 6200 mm
  • P (mast) = 19200 mm
  • J = 4925 mm

                  

Winches:

  • 2x Harken 2-speed self-tailing winches
  • 2x Harken 60 3-speed self-tailing powered primary winches

 

 

Sail:

  • 1x One Sails full batten main
  • 1x One Sails Furling jib
  • Gennaker with snuffer
  • Code0

 

General:

  • The pushpit, pulpit and stanchions are of stainless steel.
  • There is one pair of folding mooring cleats at bow.
  • Stainless steel grab rails on coachroof
  • Deck stowage on foredeck and in lazarette
  • Lockers for storage in cockpit coamings on both sides
  • Locker for storage in port side aft coaming.
  • Swimming ladder
  • Hot and cold shower in the cockpit

 

Covers and canvas:

  • Lazy bag and main cover for racing
  • Sprayhood
  • Couch roof cushion

 

Covers and canvas:

  • Dinghy
  • Honda 2.3 hp outboard engine – not part of the sale

 

SAFTEY EQUIPMENT:

 

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.





VIEWING ARRANGEMENTS

 

Lying Sicily, Italy

 

Available to view strictly by appointment

 

Office Hours Mon- Fri 0900 – 17.00

Saturday by prior appointment

   ��                                                     

For more information or to arrange a viewing please contact us.

 

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

 

Lead Broker: Michele Antonini – Grabau International (Italia)

Tel: +39 333 74 89 281 Email: enquiries@grabauinternational.com



Please contact Alex Grabau at +44(0)1590 673715

An diesem Boot interessiert? Telefon: +44(0)1590 673715

Andere Boote von Grabau International

Sehen Sie alle Boote von Grabau International
Website besuchen
*Dieser Preis beruht auf dem heutigen Währungs-Wechselkurs.
Bitte senden Sie uns ein Email
Bitte geben Sie einen gültigen Namen ein!
Bitte geben Sie eine gültige E Mail Adresse ein!
RE: Sly 48 C, Sicily, Italien
Das Nachrichtenfeld kann nicht leer bleiben!
Wird gesendet

Telefon: +44(0)1590 673715
Grabau International

82 Gosport Street , Hampshire
Lymington, Hampshire SO41 9BD
United Kingdom

Grabau International
Bitte geben Sie einen gültigen Namen ein!
Bitte geben Sie eine gültige E Mail Adresse ein!
Das Nachrichtenfeld kann nicht leer bleiben!
Wird gesendet