SW1190 Sport SPECIFICATION BOOK_AUG 2015-2.pdf
The overall finish of the Seawind 1190 Sport will be consistent with that of the well known and loved 1160 range with only the highest quality equipment used throughout.
The overall concept of the 1190 sport is for a competitive sports catamaran at a level of construction, workmanship, equipment, fitout and style that surpasses any other available in the market at this price range.
EXTERIOR / LAMINATE:
Finish: Full female moulded hulls & decks, exterior gelcoat and carbon fiber finish with moulded-in non-slip surface on deck areas.
Hull Laminate: New Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate. Polyester resin elsewhere. Laminate specifications are certified to CE and Australian survey standards.
New Sugar scoop, transom extension for improved performance with minimal weight addition.
Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
Standing Rigging - Forestay 3/8 (10mm) 1 x 19 Dieform wire.
- Sidestays 3/8 (10mm) 1 x 19 Dieform wire
- Diamonds 5/16 (8mm) 1 x 19 Stainless Steel wire.
Halyards - Main halyard: 12 mm Spectra rope : Heavy duty shackle.
- Jib halyard: 8 mm Spectra rope. Heavy duty shackle.
- Topping lift: 8 mm rope, Heavy duty shackle.
- Spinnaker Halyard: 8mm Spectra with snap-shackle and New 2:1 purchase system. - Boom outhaul: 10mm Spectra.
All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
New Fully battened square top black aramid, laminate mainsail. Triple stitched radial construction.
Leach adjustable batten end caps. Fibreglass sail battens.
New black aramid, laminate jib with vertical battens.
New Asymmetric spinnaker in any color of your choice.
New Carbon fibre bowsprit with synthetic bridle wires.
Mainsail cover with integrated lazy jack system.
Self-tacking headsail, curved headsail traveller track with end stops. With New single line control
sheet to cockpit.
New Main sheet run to port and starboard helms.
Aluminium Hatches & portholes (9 in total)
4 x Forward Hatches 470mm x 470mm
2 x Mid cabin hatches 470mm x 470mm
1 x Port Bathroom window hatch 507mm x 377mm 1 x Galley window hatch 507mm x 377mm
1 x Aft Cabin window hatch 507mm x 377mm
Fibreglass Deck Hatches:
Forward anchor & storage hatches x 5
Cockpit storage hatches x 2
6 x Docking cleats. Each side : bow, stern & amidships.
1 x Heavy duty mooring cleat on forward walkway.
Ventilation: 2 x forward cabin hatch vents.
Mast base turning blocks. All halyards & sail controls to cockpit.
13 x Rope clutches.
Sheet winches : 2 x 45ST – 2 speed self tailing, 2 x 40ST – 2 speed self tailing & New 1 x 15ST self
Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. With New 700mm
high synthetic lifelines to meet CE requirements.
2 x transom access gates with pelican hook releases.
2 x side access gates with pelican hook releases.
Aft swim ladder: folding stainless aft swim ladder.
New Carbon fibre dinghy davits.
FORWARD BEAM, CATWALK AND TRAMPOLINES:
New Carbon reinforced fwd beam with gloss carbon fibre finish
Pelican striker and adjustable cable.
1 x Mooring plate above foredeck.
2 x Anchor roller under deck. Permanent stowage position for 45lb Plough (CQR/Delta type) anchor.
(cheeks 75mm high).
Catwalk in pvc foam-sandwich fibreglass.
New Light weight plastic coated open netted trampolines.
New Carbon reinforced Targa Bar in gloss carbon finish with curved mainsheet track and New CRD sports traveller control system.
PLUMBING / FRESH WATER TANKS:
Pressure water system with water to galley and both bathrooms.
Fresh water tank: 700 litres ( 185 gallons) roto moulded. Remote deck filler. Electric fresh water pump.
Electric bilge pumps (2) with controls integral with master battery switch panel. Manual bilge pumps (2) in each hull.
New Marelon flush mounted through-hull fittings to CE/ISO standard.
Manual toilet in head.
1 x LPG bottle – 4.5kg.
Fresh water tank gauge.
New Twin lightweight Honda 20hp engines. Mounted under each helm seat at each steering station. Remote electric key start with electric tilt fitted.
Dual engine controls at port helm station.
Twin steering compasses.
New 2x Multifunction displays fitted to swing helms with speed depth and wind transducers installed.
ANCHORING / MOORING:
Electric anchor winch with chain & warp gypsy. Located under locker to give clean deck. Primary anchor is 45 lb Delta anchor type with 15 mtrs x 8mm short link galvanised chain and 40 mtrs x 16mm triple braid anchor warp.
Primary anchor is stored in a specially designed anchor roller under the forward beam.
Anchor winch has foot switch at the winch plus a remote up / down control at the helm station.
3 x PVC Inflatable Fenders.
3 x Mooring lines (each 15 metres x 14mm).
ANTIFOULING / STRIPING:
Epoxy barrier coat plus 2 coats of high quality black antifouling bottom paint.
Seawind 1190 Sport badge on each hull and stern.
DISCLAIMER: The specifications above may change at Seawind Catamaran’s discretion.
ARRIVING IN SAN FRANCISCO BAY September 2016
THE NEW HOT SPORTY CATAMARAN. At home on the open ocean as well as the race course. Pure fun.
CALL GARY HELMS 510 865-2511
With one pre ordered 1190 Sport already under construction, you can expect to see this 39 foot performance cruising catamaran sailing off the shores of New England as early as June next year. Building of the incredible strength and popularity of the 1160 range, this larger, lighter model has been designed as a true offshore cruising catamaran. With the addition of high aspect daggerboard and retractable rudder packaged with a full wardrobe of performance sails this sports cruiser is going to be hard to beat.
Helms Yacht Sales
314 Tideway Blvd.
Alameda, CA 94501