Ker Yacht Design , widely considered the leaders in this field of yacht design with a uniquely proven ability to produce smaller high performance race-boats that are competitive under IRC.
Aimed squarely at the owner who while being excited by the TP’s and 40’ Racers on the market, chooses to apportion a much smaller budget to their racing and be closer in speed to the production cruiser-racers which make up a typical local fleet. Purpose built for handicap racing under IRC and ORCi, the Bolt 37’ will be exciting to sail, and very fast for its size, but at the same time the parameters have been selected with a careful eye on the rating rules. Extensive CFD based optimisation techniques have led to lower hydrodynamic resistance but a particular effort has also been made to ensure the yacht is forgiving to sail, making it easier for the crew to extract its full performance potential. Designs from the Ker office have achieved many successes on the race course and have won many international trophies around the world, at regattas and classic offshore races. Key features of the design include:
High adrenaline sailing, but with a fair rating.Excellent value.
Modern ergonomic flush deck.
Powerful sail plan but moderate wetted surface area ensures good performance in all wind conditions.
3.5m maximum beam allows trucking/towing without police escort in many countries.
IRC rating: 1.167
Contact Liesbeth Groeneveld at +31 320746046
Please don't hesitate to contact Bach Yachting International for further information
Please contact Liesbeth Groeneveld at +31 320746046
Zusatzinformationen, Zubehör und Ausstattung:
Breite: 3.48 m
Tiefgang max.: 2.60 m
Model Bolt 37
Sail Number Tur 1901
Color Hull White
Builder CSC Composite
Designer Jason Ker / Ker Yacht Design and Engineering S.L.
Hull, deck, bulkheads and stiffners made from multi and unidirectionnal glass, vinylester resine and PVC foam over female tooling.
All laminations are done with vacuum assisted infusion technique for perfect resine/fiber ratio and low air void.
SAE4340 casted steel fin with CNC moulded composite skins.
%3 Anthimony lead bulb, casted from CNC milled plug, painted and faired with templates.
Super-duplex stainless steel studs
Keel 2330kg. (2060kg. in bulb)
Designed to meet ORC, IMS, IRC regulations and construction to be lightweight
appropriated for racing yachts.
Basic galley with plumbed sink, manual water pump and location for moulding a single burners stove with disposable gas bottles connected to the burner.
Engine box with removable portion to allow access to service engine and incorporating nav area.
Cabin lighting under coach roof, galley and nav areas.12 volt DC switch panel and battery indicator mounted on the engine box.
Battery isolator/selection switch mounted on the engine box.
Gel type batteries for engine start and service
12 V electrical panel for Engine, rev counter and start stop switches on the engine box.
Navigation LED lights at masthead
Mast Hallspar High Modulus carbon mast with internal mast jack.Boom Hallspar Deep carbon race boom
Rigging Nitronic 50 rod standing rigging
Gemini Harken Carbo
Backstay Twin aramid backstay
Equipped for 2:1 mainsail halyard, 1 fractional headsail halyard, 1 fractional halyard and 2 masthead spinnaker halyards
2 Spectra spinnaker sheets with Tylaska snapshackels or equivalent
2 Spectra jib sheets with soft shackles
2 Spectra spinnaker tack line with Tylaska snapshackels or equivalent
1 Spectra mainsheet
Mainsail traveller lines
Genoa traveller lines
Mainsail Quantum MR7000 Sq Top - 2013Headsails Quantum Code I - 2014
Quantum Code II - 2013
Quantum Code III - 2013
Spinnakers Quantum A2, A3 - 2013
Quantum A1, A1.5 - 2014
ORC conforming toerail included in in the deck mould to the foredeckTwo (2) Harken Performa # 46 Quatro primary winches.
One (1) Harken # 35.2STA winch in the pit
Two (2) Harken # 40.2PTA mainsheet winches
Two (2) Harken # 35.2PTA runner winches
5 Harken lock-in winch handles
2:1 Mainsheet system on Harken blocks, lead direct from the end of the track to mainsheet
Harken adjustable mainsheet traveller with a 6:1 cascade purchase below deck and lead trimmers foot rest
Twin transverse tracks (27mm mid-range track with #2705B.HL cars), with ball-bearing car system
In-hauler system, 6:1 lead to cockpit
Up/Down system, 4:1 cascade with a 6:1 tail purchase (24:1 total) and fitted with a floating ring #C8694
2 Harken override fairleads #C8541
Harken spinnaker sheet blocks #3195 mounted on fwd leg of pushpit
Harken spinnaker sheet diverter blocks #3195 mounted on side decks
5 Harken Halyard Blocks
7 Spinlock Jammers (1 x main halyard, 2 x masthead spi, 1 x fractional spi, 1 x jib,2 x tack lines )
Solid vang with tail lead below deck 32:1 cascade purchase exiting cockpit sole close to main traveller
1 foredeck slide opening hatch with round edges
Double s/s rail pulpit and pushpit, 8 stanchion, 316 Stainless Steel tubing, tapered towards the top.
Stainless Steel Lifelines
Foot chocks for helmsman, main trimmer
A lightweight companionway wash board
Prepreg carbon fibre rudder stock and blade,vacuum bagged and cured at high temperature.
Twin carbon pedestals and steering wheels
Rudder Bearings to be high quality self aligning roller type
Manual tap at galley sink, cold water onlyPlumbed in seawater Marine WC, with flush seacocks type
2 x Manual bilge pump one operable from below deck one from the cockpit
Flexible water tank
3 X Auto Bilge pump
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.