2012 Class 40 TYKER 3

EUR  375,000
Vereinigte Staaten
An diesem Boot interessiert? Telefon: +44 (0)1803 770 495
  • Beschreibung
  • vollständige Spezifikationen ansehen

Available now

Vereinigte Staaten
Letzter Listungspreis:
EUR  375,000 Nicht versteuert 
The Tyker3 is an evolution of the extremely successful Tyker2, design from Guillaume Verdier. Built and owned from new by a US based sailor this yacht has the finest pedigree, but due to injury/personal circumstances has only sailed one Trans-Atlantic delivery and an East Coast US race. The boat is now reluctantly for sale, extremely low mileage and in very good condition indeed. The owner is retiring from offshore sailing and so the yacht comes with a comprehensive inventory and the typical equipment that a serious sailor would need to enter Category 1 type races.
From the outset of build and design this boat has had probably the finest input from some of the biggest talents in offshore racing. Roland Jourdain ‘Bilou’ was the owners’ rep’ during the yard construction phase and as a result numerous fundamental decisions to evolve and improve this boat were implemented. This included and is not limited to: Ballast system improvement and optimisation, refined weight distribution, deck layout optimisation, refined rig design. Electrical installation was carried out by Pixel sur Mer and Bilous’ own team.
Ryan Breymaier completed the running rigging and delivered the boat to the USA consequently further optimising the boat for the following season including, rudder and steering refinements, keel adjustments (the keels have options for fore and aft locations on the Tyker3) and a general improvement and upgrading of the deck hardware.

Owners’ remarks.

This Tyker is far better built and prepared than its sister ship thanks to the expertise and input of Bilou and Ryan Breymaier and my need for detailed preparation. Our mast choice is different as well so is the entire deck set up. The interior masses were distributed differently and as a result this boat is significantly faster than the other Tyker 3. This boat is fully sorted. All she needs is, 2 days to get her sorted, time to recalibrate the electronics as usual and go!
  Le Coq Cuisine has been professionally laid up at New England Boatworks, Portsmouth RI, having been prepared for a Trans-Atlantic race that she didn’t in the end start. Sails and batteries have been stored off the boat, halyards moused out etc. With so few miles on the clock there is huge potential from this yacht and in good hands this all-round design will remain competitive for years to come.

Built mid 2012 FR Nautisme, Lorient, France
Vaccuum bagged E-glass - foam - epoxy
Architect: Verdier
CE certification: Category A
Conformity: Class40 

LOA:       12.19 m
BOA:         4.5m
Draft:         3.00 m
Displacement: 4500 kg
Steering system: Central tiller and two kick up rudders
Ballast: 4 x (total of 750 litres per side)
Engine and drive: Volvo D 1-30 diesel with low drag faired in direct line shaft
Hydro-generator: 2 x Ocean Planet PK610-600 Hydro generators
Set up for fuel cell installation

- Performance electronics: B&G H3000
- Electronics: Echomax active echo, Simrad Radar, Bohiken marine barograph
- Independent Pilots: KVH Gyropilot, B&G computers x 2, driving 2 x Raymarine linear drives
- Communications:  Sailor Satcom C, Iridium, JRC Fleet Broadband, Icon GMDSS VHF, Icon IC M92D01 hand held VHF
- Computers: Simrad NSS7 chart plotter and separate ships computer, flat screen, keyboard and mouse.
- Mast and boom:  2 spreader Axxon Composites
- Bowsprit: Rotating
- Winches: Harken Performa Racing STRs
- Deck hardware: Harken and Spinlock
- Furlers: Karver
- Safety equipment, fire extinguishers etc. to Cat 1, including MOM 8-A man overboard module and separate recovery sling

North (France)
Mainsail                3Di                        2012      4 reefs
Solent                   3Di                        2012      Furling
Staysail                 Norlam                  2012      Furling on lock
Storm jib                Dacron                  2012     
Code 0                   Pentex                 2012      Furling
A2                         Superkote             2014      ATN snuffer
A3                         Superkote             2012      Furling
A6                         Superkote             2014      ATN snuffer
Spinnakers above have been test sailed only and not raced.
Mainsail, headsail and gennaker have only been used for the Atlantic cup event from 2014, the trans-atlantic crossing used a delivery gennaker and spinnaker plus a new delivery solent. A further set of Tyker40 delivery working sails is available but these have never been fitted and may require some modification to ensure a good working fit.

Modifications/new to original specification in 2014:
Approximately 200K USD spent in 2014 including new deck paint, race prep’d bottom and;
Facnor halyard lock for staysail
Adrena performance/navigation software
New pipe berths
RAF 0100Ocean Safety 4 person liferaft with upgrade to SOLAS pack B
Keel spacer in alloy allowing to adjust the keel fore and aft (Keel is currently set in aft position)
Provision for fitting of fuel cell
Custom cradle
Viewing will not disappoint.

Available for viewing in the US. For over 50 high resolution further photographs and to register an interest please contact: Brokerage

Asking price: 375,000 Euro (Ex VAT)

Inventory and description to be confirmed subject to contract.

Please contact Allen Clarke at +44 (0)1803 770 495

An diesem Boot interessiert? Telefon: +44 (0)1803 770 495

Andere Boote von Owen Clarke

Sehen Sie alle Boote von Owen Clarke
Website besuchen
Bitte senden Sie uns ein Email
Bitte geben Sie einen gültigen Namen ein!
Bitte geben Sie eine gültige E Mail Adresse ein!
RE: Class 40 TYKER 3, Vereinigte Staaten
Das Nachrichtenfeld kann nicht leer bleiben!
Wird gesendet

Telefon: +44 (0)1803 770 495
Owen Clarke

P.O. Box 26
United Kingdom

Owen Clarke
Bitte geben Sie einen gültigen Namen ein!
Bitte geben Sie eine gültige E Mail Adresse ein!
Das Nachrichtenfeld kann nicht leer bleiben!
Wird gesendet