2011 Dufour 40E Performance
vollständige Spezifikationen ansehen
Elegant, sensitive, and a good performer, the latest Dufour in the Performance range won everyone ov
Jahr: 2011 Rumpfmaterial: GFK (Fiberglas)
Länge: 12m Motor-/Treibstoffart: /
The target set for architect Umberto Felci and the Dufour Yachts Design Office was to come up with something even better than the Dufour 40. What a challenge! And they more than came up with the goods! Its many qualities speak for themselves: finesse, precision, exciting sailing. Take a look at: cruising/racing deck layout, suitable for sailing with a full or reduced crew, out on the open sea or between two buoys; below decks, the refinement and quality of Dufour Yachts’ interiors. All adding up to a fast boat for racing or juste for the pleasure of skimming through the water; which at the same time lets you enjoy proper cruising in comfort.
Zusatzinformationen, Zubehör und Ausstattung:
Kiel: Anderer Kiel
Länge über alles: 40 ft 5 in
Breite: 12 ft 8 in
L.W.L.: 35 ft 3 in
Tiefgang max.: 6 ft 9 in
Verdrängung: 17527 lbs
Trokengewicht: 17527 lbs
Antrieb Typ: Sail drive
Engine Option 1: 1x 40 HP
Anzahl Wassertanks: (93 Gallonen)
Anzahl Treibstofftanks: (52 Gallonen)
Iroko FSC trimmed seats, GRP sole.
Central removable footrest.
2 large side lockers with lids fitted with padlock
Twin steering wheel system.
Wheels in stainless
Engine control lever on starboard side.
Large Propane locker on portside.
Spacious cockpit locker integrated in the sole of the
2 compasses for cruising and regatta purposes.
Navigation instruments placed on cockpit bulkhead.
Life raft stowage in dedicated locker under sole.
Tilting aft platform with integrated bathing ladder.
Shore power socket in cockpit.
Cockpit shower hot/cold.
All joinery work in prime choice light Moabi mahogany,
with fiddles and mouldings in solid wood.
Cabin doors with double anti-vibration bolts.
Floorboards in Moabi, high quality marine plywood.
The floor boards are in laminated marine Moabi wood.
Cabin mattress covers are quilted and made of anallergic
Saloon cushions have removable covers in cream colour
suede (other colours available as an option).
Ceiling lining of both cabins and saloon in white coloured
F O R W A R D O W N E R ? S C A B I N
Headroom: 1.89 m.
Large berth approx. 200 x 140 cm.
10 cm mattress in 2 parts with washable covers.
Access to stowage lockers under berth.
Upper lockers with fiddle on hull side around berth to
create a maximum of storage space.
Large hanging locker with shelves
Vanity table with storage on port side including removable
seat that also be used at the saloon table of the 3
cabin/1 head version and 2 cabin/1 head version.
Big drawer under the berth.
Water tank under the berth.
Light and ventilation guaranted by a big size deck
hatch, 2 portlights (according to version), 1 cabin and 2
Access to navigation instrument transducers.
H E A D ( S )
Manual marine toilets with cover in teak.
Wash basin in synthetic «Corian®» stone, with an
excellent finish and ideal for easy maintenance.
Chrome plated brass mixer tap with shower unit.
Shower with direct drainage by electric pump.
Floor grating in teak in the front heads (in 3 cabin/2
Closing upper lockers with space for holding tanks.
Ventilation by deck panel or opening portlight.
Hooks in aft head for hanging oilskins.
S A L O O N
Large U-shapped settee on portside with storage
Settee on starboard side with storage facilities.
Backrests and seats in foam.
Suede cream colour covers,
removable for ease of maintenance.
Rectangular table with fiddles in wood.
Saloon table with 2 folding blades to facilitate circulation
and (as an option) with integrated bar.
Stowage under seats and behind backrests.
lockers with doors and a bookshelf above each settee.
Bar and storage integrated in the arm rests.
Light and ventilation by 2 deck hatches, 2 fixed portlights,
2 opening hatches, and 6 ceiling lights for optimum
ventilation and day light inside.
Ambient ceiling lights.
12 V DC SYSTEM.
15 function switchboard.
12V outlet at
galley and switchboard.
1 x 100 Ah engine battery and 2 x 100 Ah service
Battery switch for each battery in aft port cabin.
L-shaped galley close to companionway.
Working top in white Corian® surrounded by wooden
Double stainless steel sink. Chrome plated brass mixer
tap for pressurised water (cold/hot).
Cooker with 2 burner stove/oven on gimbals.
Big volume refrigerator (180L) 12V with lateral and top
Stowage under sink with shelf and trays. Garbage bin,
with double compartments, nicely hidden behind a hinged
Sea water foot pump integrated in the floor.
Outboard lower cabinet with cutlery drawer and sliding
3 upper cabinets with doors on hull
side, one of which can house a microwave oven (option).
Crockery set with fiddle system for protection when
yacht is heeling.
2 big size lockers for a maximum of stowing space.
Light and ventilation ensured by opening port-light
2 spotlights over galley.
Crumb tray under sole.
VOLVO 40 hp (29 kW). Sail-drive transmission.
Heat exchanger, anti-siphon valve. Large capacity sea
Control panel close to helmsman, with hour meter and
Alternator with battery isolator.
Fuel tank approx. 200 L, gauge on electrical
Fuel filter with water separator.
Emergency fuel shut-off handle.
Engine room ventilation blower, and 2 ventilation
Two-blade fixed propeller.
Access to the engine from front and both sides.
Independent engine bilge.
Quality sound proofing high density foam for optimum
Hand laminated GRP Hull, vacuum bagged PVC foam
coresandwich above water line.
NPG Gelcoat with first of cloth impregnated with NPG
resin forming an optimum barrier against osmosis.
Inner moulded hull bottom, structural framing laminated
to the hull.
Navy blue decorative stripes on the hull.
Diamond point non skid profile on deck.
Roof covered with Iroko FSC wood.
As an optional: side
decks and cockpit covered in Iroko FSC.
Deck in PVC foam core sandwich, moulded by injection
process (Resin Transfer Moulding) for significant weight
saving, excellent interior finish, and a perfect rigidity.
Standard draft 2.10 m, cast iron keel, bolts loads taken
up by stainless steel backing plate.
Semi-elliptical rudder, filled with closed cell epoxy
Rudder stock in plain stainless steel.
Steering wheel system on self aligning roller bearings
and ball bearings sheaves for a maximum of sensation
and steering precision.
Wood handrails on coachroof.
Wood toerail on hull-deck joint.
Self-draining chain locker with eye bolt and integrated
windlass bracket, cover with locking bolt.
Removable stemhead fitting with removable anchor
Pulpit in two separate parts with separate green/red
Asymmetrical spinnaker tack ring ahead of forestay.
Pushpits with horseshoe buoy bracket, flag pole
holder and opening cable gate with hook.
Stanchions with 2 levels of stainless steel guard-rails
and life lines gates.
4 mooring cleats on backing plates, stainless steel
rubbing plates on sheer line.
Single chainplate for cap shrouds/aft lower shrouds
including an eye for fixing extra control lines.
2 deck filler plates for water, 1 for fuel.
Mainsheet track on cockpit sole with adjustable
Genoa sheet tracks with piston lead blocks.
2 genoa sheet return blocks with integrated jammer
and eye for flying spinnaker sheet sheave.
Aluminium mast collar with synthetic protection and
sheet return blocks.
Mast step in aluminium with halyard return blocks.
Stainless steel swan neck electric cable gland.
2 deck organizers for halyard returns.
7 spinlocks on coachroof.
2 halyard winches on coachroof.
2 Genoa furling lines at hand of the helmsman.
Deck block with jammer for genoa roller furling
Sliding hatch and washboard in plexiglas, with stoppers
GRP cover ahead of companionway.
Deck panels integrated in the roof.
2 winch handles with holder.
Owner?s briefcase with owner?s manual.
Grounded rigging system.
Mast and Rigging
Anodised aluminium mast with double swept backed
spreaders, rigged 9/10.
Mast is stepped on the keel.
Profiled Performance mast.
Anchor and steaming lights.
Removable inner forestay available as an optional.
Boom topping lift cleat.
Anodised aluminium boom equiped with single line
reefing system (2 reefs)*.
Rigid boom vang, with tackle led back to cockpit.
Genoa furling system with drum below deck.
Discontinuous standing rigging in single strand stainless steel
cable and Dyform*, chrome plated bronze
turnbuckles including: forestay, backstay, cap shrouds,
inter and lower shrouds.
Backstay adjusted with stay tensioner.
Running rigging in pre-stretched textile including: main
and genoa halyards, boom topping lift, main and genoa
halyards, boom topping lift, main and genoa sheets, reef
lines and furling line.
Mainsail with Dufour logo, in high tenacity cloth and 2
Mainsail cover in light grey Dufour colours.
Furling genoa with UV-protection.