Sly 47 R is a much more dynamic version of the Sly 47, specifically designed to provide interesting and satisfying results in IRC and Open class regattas. Every detail is optimized in terms of exceptional performance, yet it remains easy to manoeuvre and highly liveable also for cruising: it is more lightweight, has improved rigging and deeper extensions than the Sly 47. Sly 47 R is the outcome of accurate design by Studio Lostuzzi, a leader in technology and procedures. The result is a yacht produced from top quality materials, applied using state-of-the-art construction techniques for maximum performance and reliability, without compromising quality.
Zusatzinformationen, Zubehör und Ausstattung:
Kiel: Anderer Kiel
Länge über alles: 46 ft 6 in
Breite: 13 ft 1 in
L.W.L.: 41 ft 3 in
Tiefgang max.: 9 ft 8 in
Verdrängung: 14219 lbs
Ballast: 7054 lbs
Trokengewicht: 14219 lbs
The standard version includes 3 cabins (1 forward, 2 aft) and 1 bathrooms.
The fittings arrangement
guarantees easy movement from one part of the yacht to the next, considerable stowage space, comfort
The furniture is in composite and enamelling.
The light colouring of enamelled sections with
aluminium finishing and carbon fibre look provide the interiors with a sensation of a light-filled, spacious
The spacious and comfortable saloon is aired via an openable hatch and the port located near the galley
The rectangular table slides aft to facilitate the stowage of sails during the regattas, while the
sofa can be used as berths during long races.
The table legs and base units are in aluminium.
are fitted with cushions.
The 12V electrical circuit is supplied via four 120 Amp service batteries.
A voltmeter and ampmeter provide good battery management.
Specific strips are set into the counter-moulding of the deck and hull to provide integrated lighting to
both the deckhead lights and the various electrical devices (pumps, windlass, navigation lights, ...).
Via the alternator (power dependent on motorization) is attached to the engine.
Quick 40Ah batterycharger,
220V supply (via socket protected by a circuit breaker).
A 12V, 16-mode rear-lit electrical panel (with identification label) is located above the chart table.
cigar-lighter socket is located below the panel.
The electrical panel also provides information on water
and diesel consumption.
Lighting and sockets
Halogen lighting (spotlights and reading lamps) provide light to the various spaces for greater comfort.
spotlights in the forward berth
reading lights in the forward berth
spotlights in the head compartment
spotlights in the saloon
spotlights over the galley
chart table light
spotlight in each aft cabin
reading light in each aft cabin
navigation, engine and deck lights
A number of sockets are fitted (in the cabins, galley and above the charts table).
Teak top work with high coaming in solid wood around the work surface to avoid falling objects.
steel double sink with mixer tap.
145L refrigerator with separate compartments.
Easy-access waste bin
below the top work.
Shelving unit below the top work and drawer unit with container basket.
gimballed 2-burner hob and oven have a steel burner-protection bar.
Cupboards with doors are fitted
along the hull, above the work surface.
Model Manufacturer: Volvo
Power: 55 Hp (44 kW) at 3600 rpm
2 14V/65Ah external alternators
Electrical circuit: manufacturer supplied
Controls: Manufacturer-supplied single lever remote control
The engine controls are positioned to the right of the steering column
Cooling: Liquid cooling with heat exchanger, fluid and seawater circulation pumps, seawater filter.
The propeller is a folding ?duck-billed? type, sized to the engine power and therefore contributing to the
streamlined performance of the yacht.
The ignition and engine control panel is located to the side of the
The engine control lever is integrated with the cockpit coaming.
The fuel tank in HPDT is centrally
located in the tunnel below the cockpit, between the two aft cabins; it has a 170 litre capacity and is
equipped with an electrical level indicator.
A 44/180 Ah starter battery is specifically dedicated to engine
Recess moulded sandwich with carbon fibre surfacing,
PVC and epoxy resin core, the latter guaranteeing hull
protection against osmosis.
The bulkheads are in
The structure (cage), with recessmoulded
frame floor of biaxial and unidirectional
structures in carbon fibre, laminated with epoxy resin,
ensures the spread of all stress and pressure points
to guarantee equal and reduced strain on the hull.
The hull and deck are glued on a 120 mm overlay flange.
The hull, deck and cockpit have a white gelcoat
On the coach roof, cockpit deck and walkways, a non-slip finish is provided by a special coat
of ice white ?Awl-Grip?.
Wire steering with chain is composed as follows:
1,100 mm diameter aluminium wheels
Aluminium quadrant with autopilot link
3 stainless steel wires
Aluminium emergency helm
The metal wire and chain steering system is linked to the aluminium drive shaft section for a better
overall sensitivity-weight ratio.
In anodised aluminium:
2 forward cleats
2 aft cleats
Pulpits and stanchions
The pulpits and stanchions are in 25 mm diameter, 2 mm thickness, mirror-finish AISI 316 stainless steel
tubing (the two forward stanchions on each side are provided with little wheels against sails friction).
Two guardrails in 5 mm diameter stainless steel cable with own rigging screws.