DAPSANG is a fast and stylish CNB 77´ with great Philippe Briand design.
She sails extremely well due to her powerful carbon rig, looks stunning and offers large and elegant accommodation under deck.
REFIT March/July 2016:
DAPSANG received a thorough refit in Savona, Italy that comprises:
For more info on the refit please inquire.
DAPSANG is foreseen to leave for the Caribbean in January 2017.
For more information on this vessel, contact Manfred Haas
Mobile: +41 792 275 942
VISIT OUR OFFICIAL WEBSITE TO VIEW MORE DETAILS & YACHTS
Sloop Cutter Rigged
Length O. A.
23,47 m / 77’
Length W. L.
18,62 m / 61’09”
6,00 m / 19’10”
2,70 m / 8’10”
42 t / 99,500 lbs
14,2t / 31,400 lbs
Cummins 180 hp to 2500 tr/mn
6 guests in 3 cabins
2-3 crew in 1 cabin + forepeak
DAPSANG is one of the latest CNB 77´ of more than twelve 76 and 77 Models built by CNB. She therefore benefits of great design and especially engineering improvements over previous models.
DAPSANG sails extremely well due to her powerful carbon rig that is 0,50m taller than other models. She looks stunning and offers large and elegant accommodationwith a whitened teak interior under deck. She features a large center cockpit that can be fully protected in bad weather and a larger aft deck coupled with a new, more vertical transom design that provides more space in the aft garage,leaving enough room for an aft locker to stow a deflated tender and making a larger sunbathing deck.
She is VAT paid, benefits from a huge extra list (available on request) and is available now at far less than half her replacement costs.
REFIT March/April 2016:
DAPSANG undergoes currently (March 2016) a thorough refit in Savona, Italy that comprises:
For more info on the refit please inquire.
The CNB DAPSANG (ex SPIP) has been designed by Philippe Briand, in conjunction with the Design Office of CNB (Construction Navale Bordeaux).
Hull and deck construction drawings examined by the BUREAU VERITAS.
The vessel is CE certified, “A” category
Hull, structure and Deck
The aluminum hull is welded to the inner frame following M.I.G. or T.I.G. protocols as indicated by the construction drawings. The aluminum hull plating is 5086 H 111. The 6060 T5 grade of aluminum is used for extruded profiles.
The engine room bulkheads, the collision bulkhead as well as the bulkhead between aft cabin and aft lazarette are watertight. A removable work bench is installed in engine room. With the exception of the watertight bulkheads, limber holes of adequate dimension are cut in all locations where water could be retained.
The entire superstructure of coach roof and cockpit is made in one piece composite glass – vinylester – balsa core that is glued and bolted to the deck.
The 14,200 kg cast lead keel is bolted to the hull.
Total water capacity: 2 x 835 liters (220 gal)
Total fuel capacity: 2 x 1380 liters (338 gal)
Total gray water capacity: 300 liters + 40 liters (80 + 10 gal)
Total black water capacity: 300 liters (80 gal)
The steering system is with chain and cables. The minimum rudder angle is 35° each side.
The rudder and the rudder shaft are built of aluminum.
The rudder blade is suspended. JP3 type bearings are installed.
A welded aluminum quadrant is to the architect's plans. PAULSTRA ref. 512 951 rubber stops are installed on each.
Two aluminium/ teakwood steering wheels, diameter 1200 mm in cockpit
An aluminum tiller is included.
CUMMINS 180 hp - 4705 hrs (10/2015)
ZF gear box ratio 2,9/1
Cruising Speed app. 8-9 kn, max Speed app. 10 kn
Bow thruster of 16 hp
The engine control panel is located in aft cockpit. Sensors are ground insulated
Control panel installed in the steering cockpit.
The panel contains:
The exhaust is wet type.
A siphon breaker mounted before the through hull fittings.
A three blade propeller is installed. The propeller shaft is stainless steel, 60 mm diameter.
A non-metal Hydrolube type ring is installed on the prop shaft bracket.
A CNB hydraulic shaft brake is installed on the gear box.
The "I" type cast stainless steel propeller shaft bracket is made according to the architect's plans.
ONAN 17,5 kW 50 Hz, 220 volts single phase 50Hz with sound shield. Serviced 2012/13
6836 hrs (10/2015)
Electric sensors and the starter are ground insulated.
The exhaust is wet type with water separator after the water-lock tank
A generator control panel is integrated in the main switchboard.
A 100 liters water heater is installed. The electric power 2200 watts. Heat exchanger is connected to the generator cooling circuit.
A GR 24 volts pump or similar with SST expansion tank is installed.
Hot and cold water are distributed to all bathrooms, to the galley and to the deck shower.
A SEA RECOVERY RC 1200 (190 l/h, 90 gal/h) water maker is installed in the engine room
2272 hrs (10/2015) - Membranes renewed 8/2015
Three SST sea water filters are installed in the engine room.
Sea cocks and Piping will be SST.
Zinc anodes are fitted in the circuit.
All piping, is rigid brass curved and welded piping except connections on engine and generator.
A double water separator filter type RACOR with alarm and paper filter cartridge is installed on the fuel main suction line.
Valves are installed so as to allow the separate use of the tanks.
The suction pipes are with stum boxes and non-return valves.
Two manual diaphragm pumps, HENDERSON MK V, are installed as follows:
A high power emergency pump is main engine driven via an electromagnetic clutch.
A system of valves allows to pump either bilge.
Three electric bilge pumps with automatic level switch.
An electric pump is installed in the aft locker.
Discharge pump FEIT-AMFA 24V with automatic level switcher.
An inert gas system is installed in the engine room. A manual remote control is installed in the saloon.
The refrigerator and freezer compartments are equipped with eutectic plates.
An external digital thermometer are installed for the refrigerator and the freezer.
A 2/3 HP compressor, 220V 50/60 HZ is installed in the engine room.
An 80 liters refrigerator will be installed in the saloon.
A reverse cycle 48.000 BTU, 220 V 50/60 Hz air conditioning system is installed in the engine room.
A thermostat is installed in each air conditioned compartment.
A 220 volts 50 Hz 3 wire circuit, via a ground isolation transformer is installed.
Shore power is provided aft and forward with extension cable.
This circuit is shore, generator or inverter powered.
A 24 volts "service" circuit, two wires, negative insulated is installed.
24 V DC circuit isolation is controlled by means of an indicator at the main switchboard.
2x A 100 amps/hour MASTERVOLT 24 volts automatic battery chargers, 220 volts powered are installed in the engine room for charging service batteries.
One inverter 24/220 volts 5.000 watts sinus waves, is installed.
A 175 A/h main engine driven alternator charges the service batteries.
A switch allows battery service to be used for starting the main engine and the generator.
Six zinc anodes, ø 150mm, are mounted flush on the hull.
Azinc anode mounted on the propeller shaft.
B&G HYDRA PACK including:
“panic button” in aft cockpit
2 Suunto magnetic compass
1 electronic barometer
Radar and antenna mast on the transom
Interior furniture’s wood is made in limed teak.
Floors in teak and wenge, satin finish
Deck hatches have blinds and mosquito screen.
Portholes have blinds.
Main companionway curved steps with stainless steel hand rails
MP3 wall plugs in each cabin
1x 32” LCD screen in salon
CD / DVD / MP3 player in 4 cabins
KEF Soundlight sound system in 4 cabins and salon
1 x 23” flat screen with hp in owner´s cabin
2 water proof speakers in the cockpit with fader
Locker for charts
The cambered deck and the cockpit are laid with 12mm teak, glued, with lines following the sheer line and notched king plank. Apparent width of teak planking 42mm.
All horizontal surfaces angled to provide proper drainage.
Crane for outboard engine
Anodized chain plates with SST bushing
Bolted hatch for engine room access
Reinforcement for tracks, cleats, fairleads and winches
Cradle for life raft
1 halyard bracket
Deck shower near aft plate form
Radar and antenna mast
SST compass protection
Manual platform with teak grating
Swimming ladder built-in the platform
Hydraulic aft swimming platform
2 outboard chairs in teak
Carbon fibre folding gangway 3,2m
Rondal flush hatches on roof
HARKEN anodized aluminum winches
2 Genoa tracks with traveler and stop
2 staysail track with traveler and stop
2 turning blocks
The upper life line is 74 cm high
SST stanchions, pulpit and push pit.
A deck wash is installed in the anchor locker
An electric windlass LOFRAN TITAN A, 2000 watts, 24 V, is installed in the windlass locker.
120m of 14mm galvanized anchor chain, new 2011
1 x 75 lbs CQR anchor + 1 x 55 lbs FOB anchor
2 CNB custom fairleads forward
2 CNB custom fairleads middle
2 CNB custom fairleads aft
4 SST 15“ cleats
4 SST 12“ cleats
Hull Spars 3 spreader carbon fiber mast, 0,5m longer than standard Specification
PETITJEAN “park avenue” carbon boom with increased length for larger main sail surface
Automatic reefing system
Carbon fiber spinnaker pole fitted on mast
RECKMANN hydraulic Genoa furler
BAMAR electric staysail furler
Hydraulic outhaul for main sail
Forward deck light
Adjustable mast step
Park Avenue boom with lazy bag to receive the main sail
Bolted goose neck
Hydraulic boom-vang bolted fitting
Standing ROD rigging
1 Navtec hydraulic backstay ram with safety locks
Mainsail: INCIDENCE CUBEN FIBER
Full batten, 130 m2 6 battens, 3 reef
Reef lines led through flat blocks
Genoa: INCIDENCE CUBEN FIBER
Furler (24v) 120 m2 100%
Leech line control from clew
Staysail: INCIDENCE CUBEN FIBER
CODE 5 (290m²) with manual furler
ATN spinnaker sock
Foldable dodger for the main companionway
Foldable dodger for the aft cabin deck hatch
10 Live jackets
TENDER & LEISURE EQUIPMENT
1 ZODIAC MKIIC Futura 4,20m
25hp YAMAHA outboard engine
All cushions with close cells foam
Haas International offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.