A magnificent example of the established collaboration between Judel Vrolijk & Baltic Yachts.
Aledoa is full carbon/epoxy yacht with hull lines optimized for performances and easy sailing in any conditions. The three-spreader High Modulus Carbon mast and main boom by Hall, with swept back spreaders, provide plenty of sail power in light wind conditions.
A fantastic yacht for owners looking for quality built yacht with special attention to performance and easy handling.
The main goal with this project was to create a comfortable and safe cruising yacht but with high priorities on optimizing sailing performance. In order to create top level performance characteristics it is important that the yacht is kept light. High technology in material and construction are the main tools to achieve this. Carbon Epoxy Vacuum infused laminates were used for deck and hull and this plus bulkheads and interior flat panels produced in Baltic Yachts´ unique laminating press granted an optimum result.
Detailed weight studies by Baltic Yachts and extensive VPP calculations, including CFD studies, by the Naval Architect, Judel/Vrolijk & co, running several variations in displacement and sail areas against each other guaranteed that the performance criteria’s would be reached.
BALTIC YACHTS OVERVIEW:
Baltic Yachts was founded 43 years ago in 1973 by five men looking to build superior yachts – or superyachts - that would give them the edge over their competitors. Baltic Yachts is now one of the leading names in custom and semi-custom made luxury saliboats.
The Baltic Yachts yard is located in a village of Bosund on the West coast of Finland. Here they have developed an excellent facility which is a jewel in the yacht building industry.
The first yacht built by Baltic Yachts Ltd was the Baltic 46 in 1974. Since then they have built custom and semi-custom built yachts for sale in all sizes from 38ft to 152ft.
Available for showing by appointment.
For more information or to arrange a showing, please contact us.
Office+1 866 607 5393
Cell. +1 571 426 2705
Euro: +39 055 535 6869
The yacht conforms with the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) and is certified category A – “Ocean” (or Cat B – whichever is appropriate)
Sandwich construction. Laminate vacuum infused Carbon/Epoxy. Foam core. Postcured under vacuum at 60°C temperature. The hull is coated with Speedy Carbonium racing antifouling.
Fixed keel with stainless steel fin with a lead bulb.
Sandwich construction. Laminate vacuum infused Carbon/Epoxy. Foam core. Postcured under vacuum at 60°C temperature. Topsides have been re-sprayed with AwlGrip in 2013. Teak deck on side decks, coachroof, cockpit floors and seats and on the coamings.
Composite flush deck hatches
Hardened glass cabin windows
Structural bulkheads as well as constructional panels in Carbon fibre/ Epoxy laminates. Prefabricated in a laminating press. Visible surfaces are teak faced.
KEEL & RUDDER:
Fin keel with high-grade stainless steel fin and lead bulb. The keel fin has a ‘top plate’ recessed into the hull spreading load over a larger area. Cantilevered semi-elliptical balanced spade rudder moulded in carbon with PVC foam core. Vacuum-pressed tapered carbon/epoxy rudderstock passing through JP3 self-aligning roller bearings.
Engine & gearbox:
YANMAR 4JH3-DTE 125hp 4-cylinder turbo diesel engine with approax 1500h, July 2016. Freshwater engine cooling The engine has been regularly serviced by certified technicians.
ZF Reduction gearbox with Saildrive leg
Morse single lever control
Propulsion & Steering:
Max Power R 206.3 hydraulic retractable bowthruster
Brunton 4-bladed folding propeller
Twin 5-spoke carbon helm wheels in clear carbon with composite steering pedestals
Vectran steering cables
12 V/DC 60Ah starting battery
Mastervolt LI-ION house batteries 24V/DC 600 Ah
50 Amp start battery alternator
110 Amp 24v high output secondary alternator for charging service batteries
230 Volt Ac shore power
DC/AC Inverter 5kW, Mastervolt Model Mass 24/5000
24vDC domestic systems with 220vAC via shore-power, inverter or generator
24vDC 60Ah engine start battery
24vDC Mastervolt Li-Ion service batteries with 600Ah capacity
Mastervolt Mass 24/100 100A battery charger.
Mastervolt Mass Sine 24/5000 5kw Inverter
Fischer Panda AGT 4kw 24vDC generator
Baltic Yachts custom made with automatic safety circuit breakers. Indication diodes, amp. meters, voltmeters and tank level meters are provided.
PLUMBING & GAS SYSTEMS
60 litre water heater. Heated by engine cooling water or by 220vAC immersion heater element from AC system.
Water pressure system with outlets in heads and galley.
Telephone type shower, water faucet for cold and hot pressurized water.
Deck shower outlet warm & cold.
Spectra Newport 400 GPD (106 L/day) 24 VDC watermaker
High capacity electric bilge pump with automatic switch
2x manual bilge pumps
Hydraulic 24V/DC Power Pack with two motors controlling mainsail outhaul, genoa sheet sliders and bowthruster via buttons at helm pedestals
Fuel: 740 litre fuel capacity
Fresh Water: 790 litres water capacity
Holding tank: 250 litres Blackwater holding tank
NAVIGATION & COMMUNICATION EQUIPMENT
B&G Hercules Race pack with 4x mast-mounted repeaters
Autohelm 6001 autopilot
Simrad CX44 radar/plotter display with GPS
Dell PE750 SATA PC computer system
Twin steering compasses
Simrad RS87 VHF with DSC
Thuraya Mini-M sat phone
Stainless steel sink with hot and cold pressure water
Kenyon “pop up” electric stove
24vDC refrigeration system with twin front-opening fridges and freezers
Teak covers for galley equipment when not in use
Kenyon ‘pop up’ electric stove
2x Tecma electric heads
Hot & cold pressurized water supplies with shower in heads
AIR / HEATING
CLD HSCS24D reverse cycle air-conditioning and heating system
Alpine CD/DVD/radio stereo system with Bluetooth and speakers in saloon and cockpit
Samsung Syncmaster LCD TV with Digi-box
RR Ramert Antenna
Forepeak/crew cabin with berth, toilet and locker, entry from deck hatch; next aft separated by watertight bulkhead is the master cabin with centerline queen size berth, hanging lockers starboard, en-suite shower and head to port;
Next aft to starboard is the galley; opposite to port is the salon; aft of the salon is the nav station; next aft port and starboard are heads with showers and guest cabins with lower double berths and upper single berths.
Advanced lightweight construction techniques used in construction of the interior. Structural bulkheads as well as constructional panels in carbon fiber/ epoxy laminates.
Prefabricated in a laminated press.
Visible surfaces are teak faced. Teak and holly soleboards
Cream leather upholstery
Red cloth upholstery in accommodation cabins
White cloth curtains
Skyscreens for opening deckhead hatches
Rig: Triple spreader high modulus carbon fibre mast (high modulus) by HALL Spars. Rig checked and repainted – January 2015
Carbon fiber boom by HALL Spars
Carbon fiber bowsprit
Hydraulic backstay, rod vang, outhaul and inner forestay tensioner
Lewmar winch package
Primaries (2) 88-3 STOR Electric
Secondary/Main sheet (2) 66-3 STOR Electric
Reef, utility (2) 48 STOR Electric
Halyard at mast base (2) 54 STOR Electric
Mainsail 3DI 2014 - North
Mainsail 3DI 2006 - North
Jib 3DI 2014 - North
Jib 3DI 2006 - North
Gennaker 3DI 2014 - North
Gennaker 3DI 2006 - North
Staysail 3DI - North
Staysail DL - One Sails
Pulpit and pushpit made of Stainless Steel tubes are mounted on the bow and transom.
The pulpit is fitted with navigation lights and the pushpit with a stern light.
Double lifelines are installed passing through S.S. stanchions.
Manually-activated tender garage door
Folding Carbon passarelle
Composite flush deck hatches
Covers & Canvas:
Anchoring & Mooring:
Custom underwater anchor launching system with custom modified anchor/
Lewmar 3000 24vDC electric anchor windlass with gypsy and drum for chain and rope
57kgs anchor with 75m of 10mm stainless steel chain
Tender & Outboard:
Zodiac 3.20m tender with Yamaha 8hp 2-stroke outboard
Lying Scarlino - Tuscany
Available to view by appointment
340 Royal Poinciana Way
Palm Beach, FL 33480