Zusatzinformationen, Zubehör und Ausstattung:
Name des Schiffes
ALABARE
Spez.
Designer: Robert Perry
Kiel: Langkiel
Rumpfform: Einrumpfboot
Maße
Länge über alles: 35 ft 11 in
Breite: 11 ft 9 in
L.W.L.: 30 ft 5 in
Tiefgang max.: 5 ft 6 in
Verdrängung: 20351 lbs Halb beladen
Ballast: 8739 lbs
Brückenhöhe: 52 ft 6 in
Stehhöhe: 6 ft 4 in
Maschine
Gesamtleistung: 44 HP
Maschine 1:
Marke des Motors: YANMAR
Baujahr: 1986
Motortyp: 4JH-E FWC (4) Cylinder
Motor Typ: Innenbordmotor
Motor-/Treibstoffart: Diesel
Betriebsstunden: 3850
Propeller: 3-Blatt Propeller
Antrieb Typ: Direktantrieb
Motorleistung: 44 HP
Tanks
Anzahl Wassertanks: 2 Edelstahl (100 Gallonen)
Anzahl Treibstofftanks: 1 (75 Gallonen)
Anzahl Fäkalientanks: 1 GFK (20 Gallonen)
Kabinen
Anzahl an Einzelbetten: 1
Anzahl an Doppelbetten: 3
Anzahl Kabinen: 2
Anzahl Toiletten: 1
Elektrische Ausstattung
Strom: 12V
Deckausstattung
Ankerwinde elektrisch
Introduction
This overview below is basically quoted from a "credible online resource" and nicely sums up what the Industry .. and sailors worldwide .. have known for years now. The ALABARE is Hull No. 3 of this TA SHING-built model and is a first-class cruising vessel by virtue of her pedigrees as well as her maintenance by knowledgeable Owners over the years too.
"The TASHIBA 36 is the last and best of Robert Perry’s canoe-sterned cruising designs. Her slim full keel, sleek underwater configuration, long waterline, and generous sail plan gives a performance that is beyond expectation. She is seakindly, dry and stable, but also fast and efficient. Of the many bowsprit-style cutters available, the TASHIBA 36 stands alone."
Deck & Hull
The "ALABARE" has a laid teak deck & a teak caprail. There is a laminated teak bow sprit, teak cockpit seats and a teak cockpit grate. As built, she has louvered teak Companionway doors (as well as drop boards). There are (4) Deck Prisms add more ambient light to the Fore Cabin, the Galley, the Head and the Nav Station areas.
The hull and deck house are “Colonial Ivory” in color. The sheer bulwark is a custom “Grand Banks Beige”. The mast & boom are Bristol Beige AWLGRIP finished. The Boot-Top is Dark Blue, The Cove Stripe is bright gold MYLAR tape. The bottom has red anti-fouling paint.
* There is a solid teak topsides rub rail with stainless steel striker plates
* The deck is teak secured & sealed with black caulking compound
* There are double lifelines with boarding gates aft, port and starboard.
* The bow sprit platform has double bronze anchor rollers.
* A wash-down outlet is at the bow.
* A custom substantial teak and white oak Samson Post structured for properly securing anchor rodes is at the bow
* (8) Strong and properly-sized 8" stainless steel mooring cleats are placed appropriately for docking forward, amidships & aft.
* (6) Bronze hawse pipe fairleads are placed appropriately to provide secure chocking for dock lines.
* Destroyer-type 32" stainless wheel with beautifully crafted teak grip, stainless steel guard rail & wheel brake.
* Emergency tiller.
* A folding stainless boarding ladder with (3) comfortable teak steps is attached to the transom. It has been modified so a person who has fallen overboard can release it while in the water, making it possible to return to the deck.
* (4) Stainless Cowl Vents, FRP Dorade boxes, stainless steel sheet guards for the (2) forward Dorades.
* Teak-framed "Butterfly" style opening skylight over Main Salon w/ SUNBRELLA Toast (light tan) Canvas Cover
* One-piece cast iron ballast encapsulated with resin and (6) paired layersof glass, mat and roving.
* (13) Bronze opening ports with stainless steel outer trim rings.
* VETUS Foredeck Hatch, 20"x20" "offshore duty" Magnus Escape Hatch w/ satin polished aluminum frame & (4) securing latches (new, 2014)
Sails & Rigging & Deck Gear
Rig & Rigging
There is a US-made spar system (mast & boom) that is painted buff / beige & has 1x19 stainless steel standing rigging also fabricated in the United States. The rig is keel-stepped with equipped with a single-set of spreaders & has internal halyards
Rig Dimensions (cutter): I=46.05' (14.4m), J=17.45' (5.32m), P=41.65' (12.69m) & E=14.50' (4.42m). Mast Height Above Waterline: (approx) 52.5'
Sail Area (total @100& Fore + Main Triangles): 401.8 Sq/Ft
* SCHAEFER MARINE 2100 Genoa / Yankee Furling System.
* Storm Trysail track fitted to the mast, starboard side
* (4) Halyards; (1) Main, (1) Genoa, (1) Spinnaker & (1) Staysail. The Main & Genoa halyards are "internal" and the Staysail & Spinnaker halyards are installed "external" to the mast
* A DYNEMA Inner-Forestay is stored to the side when the Staysail is not in use. This allows for easy Genoa handling when short tacks are necessary. A spare (original) 1x19 stainless steel Inner-Forestay is stored under the V-Berth.
* Running Backstays, port & starboard (note: the Running Backstays counter the Inner-Forestay is in use).
* Pin rails, custom teak w/ (4) pins per side, at the shrouds, port & starboard
Deck Gear
* (8) LEWMAR chrome-plated bronze winches; (2) L43CST Two-Speed Self-Tailing, (1) L40CST Two-Speed Self-Tailing, (1) L24C Single-Speed, (3) L16C Single-Speed, (1) L7C Single Speed
* Black anodized Main Sheet tracks (with roller-bearing cars). Genoa sheet tracks, and Staysail tracks are firmly attached to the decks.
* FICO Mainsheet Traveler with cross-hauls & ball-bearing car (mounted forward of the Companionway & the Dodger assembly
Sails
* 130% NEIL PRYDE furling Genoa has been modified somewhat by raising the clew to give it a moderate high-clew Yankee cut (for easier sail handling, improved visibility, and improved aesthetics). A white sacrificial UV cover is sewn on the leech. A sail bag is included.
* The NEIL PRYDE Mainsail is fully-battened and has (2) sets of reef points. A sail cover and bag are included.
* A DUTCHMAN Sail Flaking System easily stores the Mainsail on the boom.
* The NEIL PRYDE Staysail is hanked on to the Inner-Forestay.
* A white Asymmetric Cruising Spinnaker .. that requires no pole .. is included in the inventory.
* A Storm Jib and a Storm Trysail fill out the inventory.
* A small Steadying or Riding sail is included to keep the boat into the wind at anchor.
Accommodations
The interior teak joinery is finished with a Satin Varnish application. Besides the sealer coats, there are at least (4) coats of hand-rubbed varnish applied at the Factory at time of build. For anyone that has inspected a TA SHING-built yacht, it's clear that this production is second-to-none and rivals those efforts of some of the world's other best quality Manufacturers.
The Headroom throughout is approximately 6'4".
The interior layout for the TASHIBA 36 is as follows: Forward is the V-Berth, very spacious with drawers and storage. There is a large storage area under the V-Berth area. The Head and separate shower stall are just aft of the V-Berth area and to starboard. There are Marble counter tops & a teak medicine cabinet and lots of storage. The Main Salon has a "L" shaped Settee and a large teak dining table which can be lowered for an enlarged extra sleeping area. There is a long Settee on the port side as well that can be used as a single berth. The Galley is on the port side and is in a "Keyhole" Design & a double well-insulated refrigerator compartment with 6" insulation. The Aft Cabin is aft to starboard opposite the Galley with a nice size double berth and very good head room.
Fore Cabin details: The Master Stateroom , which accommodates two, features a large Queen berth, teak woodwork, storage bins on the sides and drawers under the berth. The berth itself measures approximately 6'3" in the "vertical" and well over 7' in the "horizontal" dimensions! A large hanging locker is on the port side. A louvered door, as well as an opening hatch, provides ventilation, light, and egress as needed. A glass deck prism provides additional light.
Head details: An enclosed Head is to starboard. Formica counters and bulkheads are enhanced with teak trim. The stainless wash basin has hot & cold pressure water as well as a manual fresh water pump. A teak-trimmed mirror / medicine cabinet is over the basin. The toilet is manually pumped. A separate molded shower enclosure features a seat.
Aft Cabin details: The Aft Cabin for the "ALABARE" features the Factory Optional encloses entrance with door layout (in lieu of the standard "Open" Quarter Berth setup) . The berth measures approximately 48" in width. There is adjacent storage further aft in the Cabin via a door for access. Additional ample storage is provided by a hanging locker and shelving / bins throughout.
Galley
The U-shaped Galley is on the port side of the Companionway. It features a large top and front-load refrigerator with 4” insulation, cooled by an efficient Dometic 12VDC ADLER-BARBOUR SuperColdMachine unit. The highly-rated (2) burner SEAWARD Princess propane stove w/ oven / broiler is fueled by (2) 20# tanks located in a Lazarette locker. A XINTEX Fireboy fume detector & Remote Electric Gas Shut-Off Solenoid Valve control for the propane tank is installed at the Galley There are twin stainless sinks with hot and cold pressure water as well as a manually-pumped fresh & sea water pump. The counters are white Formica. There is abundant storage in the teak cabinets around the Galley area.
Electronics
The "ALABARE's" electronics were upgraded in 2001.
The VHF is a STANDARD Horizon Intrepid model with a masthead antenna installation.
RAYMARINE instrumentation connected by a "Sea Talk" feature is located at the Helm Station in an EDSON console. The RAYMARINE ST 6000 Plus Auto-Pilot control, an ST 60 TriData instrument (Depth, Speed, Water Temp, SOG, etc.), and ST 60 Wind (Wind Monitoring Instrument w/ AWI / WS & Close Hauled functions), along with the Bow Thruster Control are all co-located at the Helm Station for access & convenience of operation. A ST 60 Plus Graphic Display Repeater shows the information at the Nav Station.
A RAYMARINE SL 72 Pathfinder Radar Monitor is mounted over the Nav Station. It swings around so it can also be viewed from the Cockpit. The Radome is mounted on a pole at the aft rail slightly to the port side.
A RAYMARINE A-70 Multi-Function Display (MFD) self-contained GPS Chart Plotter is installed next to the Companionway in the Cockpit. The Dodger protects it from weather conditions. It can be viewed from the Helm Station. A STANDARD VHF is mounted in the console at the Nav Station. A wired remote in the Cockpit allows easy communication by the Helmsperson.
A SONY Compact Disk Player, AM / FM radio with speakers in the Cockpit and the Main Salon provides news, weather, and entertainment.
A RITCHIE Globemaster compass is mounted at the Helm Station.
Electrical Systems
Power is provided to the "ALABARE" electrical systems via a 110VAC Shore Power & 12VDC Ship's Service & Engine Systems. There are (2) GUEST Pro Sport 12 battery chargers and an engine 55 AH alternator.
The 12VDC system is powered by (3) battery banks with a total of (5) 12VDC batteries. A single Group 27 battery is used for Engine Start & (2) big 8D batteries that make up the Ship's Service / House Bank are connected only through a XANTREX PathMaker Automatic Power Switch that only connects the Banks when a charging source is available. This eliminates the unfortunate possibility of one Bank draining all of the battery power on the boat. There is a short term manual over-ride .. Battery Parallel Switch .. when batteries must be combined for emergency starting. The Banks, which are connected to separate "on" and "off" switches, are located under the Quarter Berth. The engine alternator, rated at 55 AH, normally charges the (2) Banks, but a GUEST Pro Sport 12 is available as needed. The House Bank power goes to the (18) breaker DC electrical panel.
The third battery Bank, which is located under the V-berth, provides power to the Bow Thruster, the Anchor Windlass and the Wash Down Pump. The Bank is charged by a second GUEST Pro Sport 12 charger.
The Shore Power System is 110VAC and is distributed by (9) branch circuits. There are both AC amperage & DC voltage meters at the pane. The system supports (6) interior outlets. There is a 50' Shore Power Cord. The outlets in the Galley & the Head GFI unit are GFI (Ground Fault protection). From the (2) 30 AH inlets, (1) HUBBELL & (1) MARINCO, on the port side outside of the Cockpit, the line is connected to a GUEST Galvanic Isolator to reduce galvanic currents that cause underwater metal parts to corrode, such as zincs and bronze propellers. From there, the current goes to circuit breakers in the electrical panel box and on to the various electrical components. The electrical bonding system includes, but is not limited to, chain plates, metal seacocks, tankage, engine, mast step, deck plates, and rudder fittings.
Systems
* SLEIPNER Side-Power Model TS57TI Bow Thruster is installed under the V-Berth in the bow.
* Anchor & Deck Wash Down System with outlet connection forward
* Hot & cold pressure water system with (2) stainless steel tanks with a total capacity of 100 US Gallons (378 liters)
* ATLANTIC MARINE T6E hot water tank, (6) US Gallon capacity
Pumps
* Fresh water pump, WEST MARINE 12VDC
* Shower sump pump for Grey Water Tank, JABSCO 12 VDC
* Bilge pump, RULE heavy-duty high-capacity, 12VDC with auto-float switch
* Manual bilge pump (mounted in Cockpit area)
Engine & Drive-Train
The ALABARE has a YANMAR Model JHE (4) cylinder, 44 HP FWC diesel engine. It is fresh water (antifreeze) cooled through a heat exchanger. It has clocked approximately 3850 hours. An auxiliary starter button has been installed near the engine to assist in servicing.
* Fuel Tankage; 75 US Gallons (284 liters), mild iron tank with inspection plate & internal baffles (note: fuel tank cleaned, Spring 2017 & fuel changed every (2) years)
* Packless Shaft Seal (PSS) system that is essentially dripless.
* (3) Blade bronze propeller that was serviced and balanced in 2013.
* (2 Blade propeller (spare & original), bronze (stored in Cockpit seat locker port side)
* Engine room blower / ventilator, 12 VDC
* Engine alternator, 55 AH
Additional Equipment
Ground Tackle
* LEWMAR Pro Series H-3 electric / manual Windlass (rated w/ a pull of 1900 lbs)
* 35 lbs CQR Plow Working Anchor is attached to a 50' galvanized BBB high strength chain rode connected to 250’ x 3/4” (3) strand nylon line.
* 55 lbs LEWMAR Delta Plow Storm Anchor & 50' of galvanized BBB high-strength chain rode is connected to 150’ (approx.) x 3/4" nylon (3) strand line and are stored under the port Cockpit bench locker.
* 16 lbs DANFORTH Fluke Kedge / "Lunch Hook" Anchor is attached to a chain & webbing rode at the cockpit rail.
Safety
* White horseshoe life-ring buoy Type IV attached to stern rail.
* White LIFESLING Type V MOM attached to stern rail.
* (8) Type II PFD’s (life jackets) are stored under port cockpit bench.
* (3) Fire extinguishers
* (3) Carbon Monoxide / Smoke Detectors throughout
Canvas (SUNBRELLA Toast)
* Dodger with stainless steel fame railing
* Binnacle / Wheel / Electronics & Compass Cover
* "Butterfly" Hatch Cover (by HATHAWAY, REISER & RAYMOND)
* Mainsail Cover
Misc
* DICKERSON Newport Cabin Heater, solid fuel (wood or charcoal), stainless steel with stainless steel heat shields plates & exhaust pipe to deck-mounted "Charlie Noble" stack
* Gray BOTTOMSIDER cockpit cushions.
* Teak flag mast with yacht ensign attached.
* Outboard motor mount attached to stern rail.
* MAGNUM stainless steel kettle grill attached to stern rail.
* Spare (2) blade bronze propeller is stored under port Cockpit bench.
* (9) Appropriately-sized vinyl fenders stored in port Lazarette.
* (2) Stainless fishing rod holders are attached to stern rail.
(remove)
